< Previous169EquipmentLos Angeles: (800) 446-1888San Diego: (800) 261-4456Auto ScrubbersTE-T350-500-0007TE-T350-650-0010TE-T350-650-0011ec-H2020” Brushes, Drivers & SqueegeesElectrically converts water into an innovative cleaning solution that cleans effectively, saves money, improves safety, and reduces environmental impact compared to daily cleaning floor chemicals and methods.+Smart-Fill™ makes battery maintenance safer by removing the task of checking, opening, and filling flooded batteries.24” Brushes, Drivers & SqueegeesTE1213040Poly Brush (need 2)TE1210136Nylon Brush (need 2)TE1213041Abrasive Brush (need 2)TE 1209160Pad Driver (need 2)TE1222960Front Squeegee TE1222961Rear Squeegeeec-H20 CartridgeT350 Stand-On Floor ScrubberGives you the confidence to reduce cleaning costs while delivering high performance cleaning results.High productivity rates and great maneuverability make this stand-on scrubber an ideal choice for large or obstructed spaces. Choose Tennant technologies like ec-H2O NanoClean® and Smart-Fill™ automatic battery watering for added benefits.REDUCE COST TO CLEAN• Clean over 30,000 square feet per hour without sacrificing performance on the floor.• Maximize uptime with a durable design, easy-to-access mechanicals, and readily available parts and consumables.• Maximize machine usage with up to 94 minutes between dump and fill cycles and up to 4 hours of battery run time.• Simplify training and increase efficiency with on-board machine instructions for operators.• Minimize secondary cleaning operations with ec-H2O NanoClean® and Severe Environment™ Switch.IMPROVE HEALTH AND SAFETY• Reduce the risk of slip-and-fall accidents and ensure soils are removed from the floor with advanced squeegee design.• Ensure operator comfort and control with ergonomics designed for a stand-on machine with easy-to-use steering and controls.ENHANCE FACILITY IMAGE• Ensure consistent results with programmable Zone Settings™ that reduce dependence on operator set-up for different surfaces and areas.• Incorporate daytime cleaning with optional Quiet-Mode™ that reduces machine noise levels to as low as 59.7 dBA.• Clean a variety of floor surfaces, including textured and grouted floors, with excellent down pressure and multiple cleaning pad and brush choices.MINIMIZE ENVIRONMENTAL IMPACT• Reduce water consumption up to 70% and disposal of cleaning detergents into the waste stream with ec-H2O NanoClean® technology.SMART-FILL™AUTOMATIC BATTERY WATERINGINNOVATIVE, EXCLUSIVE TECHNOLOGIESPro-MembraneMachines22Cleaning Path20”24”Solution Tank14.1 gal14.1 galRecovery Tank18.4 gal18.4 galdBA Level63.7 dBA64.5 dBAQuiet Mode dBA Level59.7 dBA61.3 dBATE1213032Poly Brush (need 1)TE1210386Nylon Brush (need 1)TE1213033Abrasive Brush (need 1)TE12109197Pad Driver (need 1)TE1223124Front Squeegee TE1223125Rear SqueegeeTE9013646ec-H20 Cartridge (270ML)Smart-FillPad WrapPad DriverInsta-Clickwww.maintex.com170EquipmentLos Angeles: (800) 446-1888San Diego: (800) 261-4456Key machine features of the 5700 walk-behind floor scrubber:• Aluminum squeegee assembly and scrub heads, shock-absorbing frame and durable polyethylene construction for long machine life• Up to 300 lb/ 136 kg of down pressure with heavy-duty motor options• Tennant’s innovative ec-H2O and FaST technologies use 70% less water and clean up to three times longer with a single tank of waterKey machine features of the 5680 walk-behind floor scrubber:• Corrosion resistant scrub deck and frame connect with impact absorbing linkages for maximum durability• 28 in/ 70 cm, 32 in/ 80 cm, and 36 in/ 90 cm cleaning path options to match your environment• Optional sealed battery eliminates daily battery maintenance and helps decrease the risk of operator damage, common in standard batteriesAchieve a consistently high level of clean with the 5680 walk-behind floor scrubber. Simple controls and streamlined maintenance features reduce cost of ownership. Extra-large tanks and optimal water recovery ensure maximum uptime and a safe, dry environment.Get outstanding cleaning performance in even the toughest environments with the 5700 Industrial Strength Floor Scrubber. This heavy-duty scrubber features rugged construction and maintenance-saving features including a breakaway squeegee, large demisting chamber and scrub heads with long-life corrosion resistance. With up to 300 pounds of down pressure, the scrubbing strength of this heavy-duty walk-behind scrubber is made for industrial, manufacturing and large commercial/retail cleaning.TE39791414” Pad DriverTE22232014” Light Duty Polypropylene TE22232114” Soft NylonTE22232214” Abrasive Bristle - PremiumTE39791616” Pad DriverTE3024116” Light Duty Polypropylene TE104250016” Polypropylene TE104249916” Soft NylonTE104250416” Abrasive Bristle - PremiumTE39791818” Pad DriverTE1177118” Light Duty Polypropylene TE1177218” Abrasive Brush AssemblyTE1177318” Nylon Disk Brush AssemblyTE37404128” Stiff Polypropylene TE22230428” Polypropylene TE22230528” Soft Nylon TE22230628” Abrasive Bristle - Premium TE37404232” Stiff Polypropylene TE22230732” Polypropylene TE22230832” Soft Nylon TE22230932” Abrasive Bristle - Premium TE37404336” Stiff Polypropylene TE22231036” Polypropylene TE22231136” Soft Nylon TE22231236” Abrasive Bristle - Premium5680 / 5700 Walk-Behind Scrubber Cleans tough industrial facilities 5680 Walk Behind ScrubberFeatures56805700TE5700-700D28” DiskTE5700-700DECH2O28” Disk with ec-H2O™TE5700-800D32” DiskTE5700-800DECH2O32” HD Disk with ec-H2O™TE5700-900D36” DiskTE5700-900DECH2O36” Disk with ec-H2O™TE5700-700C28” CylindricalTE5700-700CEECH2O28” Cylindrical with ec-H2O™TE5700-800C32” CylindricalTE5700-800CECH2O32” Cylindrical with ec-H2O™TE5700-900C36” CylindricalTE5700-900CECH2O36” Cylindrical with ec-H2O™5700 Walk Behind ScrubberCylindrical Brushes (2 required)279463Standard 240 amp 6-volt Wet Battery (6 required)AAJ-305Extended Run 360 amp 6-volt Wet Battery (6 required)GCH036251X36-volt Remote ChargerDisk Brushes (2 required)TE222381Front - 28” TE222382Rear - 28” TE222241Front - 32” TE222242Rear - 32” TE222413Front - 36” TE222415Rear - 36” Linatex SqueegeeBatteries & Charger (replacement)Choose the ideal options to customize the 5700 floor scrubber for your environment:• Available in disk or cylindrical scrub heads with three path widths: 28 in / 710 mm, 32 in / 810 mm or 36 in / 910 mm• Off-aisle power wand extends cleaning reach• Dual vac fan increases vacuum lift by up to 30 percent to pick up bulky, tough soils found in industrial facilitiesCleaning Path28”,32”,36”28”,32”,36”Solution Tank30 gal30 galRecovery Tank40 gal40 galBrush Pressure Disk(Cylindrical)100lb & 200lb(85 lb)0 lbs - 300 lb(0 lbs - 90 lb)TE5680-70028” DiskTE5680-700ECH2O28” Disk with ec-H2O™TE5680-80032” DiskTE5680-800ECH2O 32” Disk with ec-H2O™TEM5680-800 ECH2032” Disk with ec-H2O™Hydrolink & BrushesTE5680-900ECH2O36” Disk with ec-H2O™TE5680-700C28” CylindricalTE5680-800C32” CylindricalTE5680-800CECH2O32” Cylindrical with ec-H2O™TE5680-900C36” CylindricalTE5680-900CECH2O36” Cylindrical with ec-H2O™Auto Scrubbers171EquipmentLos Angeles: (800) 446-1888San Diego: (800) 261-4456Key machine features of the T7 Micro-Rider Floor Scrubber:• Hygenic® 29 gallon/ 110 liter tank is easy to clean, helping to reduce on-board mold, bacteria, and odors• 26 in/ 65 cm or 32 in/ 80 cm cleaning path options to fit your cleaning needs• Quiet 67 dBA sound level for scrubbing in noise-sensitive environmentsT7 Micro-Rider Floor ScrubberCleans Large and Small Environments Safely and ProductivelyClean both large areas and tight spaces easily with a floor scrubber designed for greater efficiency and less environmental impact. The T7 Micro-Rider Floor Scrubber uses innovative Tennant technologies such as optional ec-H2O NanoClean® technology to reduce the amount of detergent and water needed.TE379013 13” Pad Driver TE1018377 13” Soft Nylon TE1014346 13” Polypropylene TE1018457 13” Abrasive Bristle - PremiumTE379016 16” Pad DriverTE1016634 16” Soft Nylon TE101663316” PolypropyleneTE1018455 16” Abrasive Bristle - PremiumTE37404128” HD Polypropylene TE22230428” Polypropylene GroutTE222305 28” Soft Nylon TE222306 28” Abrasive Bristle - PremiumTE374042 32” HD Polypropylene TE22230732” Polypropylene GroutTE22230832” Soft NylonTE22230932” Abrasive Bristle - PremiumTE9000862 26” DiskTE9006143 26” Disk with ec-H2O™& On Board ChargerTE-T7-650D-EBHO26” Disk with ec-H2O™, On Board Charger & HydrolinkTE9000868 32” DiskTE9006144 32” Disk with ec-H2O™ TE-T7-800D-EBOL32” Disk with On Board Charger, Strobe Light & 360 AH BatteriesTE-T7-800D-EAS32” Disk with AGM BatteriesTE-T7-800D-EBHO32” Disk with On Board Charger, Hydrolink & 360 AH BatteriesDisk MachinesCylindrical MachinesSqueegees - Back EndSqueegees - Side (requires 2)Squeegees - Side (requires 2)TE9001968 28” CylindricalTE9006076 28” Cylindrical with ec-H2O™ TE9001970 32” CylindricalTE9006077 32” Cylindrical with ec-H2O™TE390942 26” RearTE390943 26” Front TE390922 32” RearTE390923 32” FrontTE86859 Disk ModelTE391334 Cylindrical ModelDisk Brushes (2 required)Cylindrical Brushes (2 required)FeaturesCleaning Path26”,28”,32”Solution Tank29 galRecovery Tank29 galBrush Pressure Disk(Cylindrical)Varies40lb - 160lbAuto Scrubberswww.maintex.com172EquipmentLos Angeles: (800) 446-1888San Diego: (800) 261-4456TE-T12800CTE-T12800C-EBASTE-T12800C-EBOHPSTE-T12XP800CTE-T12XP800C-EBHOPTE-T12XP800C-EBPOCHDTE-T12800DTE-T12800D-AGMSIDETE-T12800D-EBOPSDTE-T12800D-ECH20TE-T12XP800DTE-T12XP800D-EBPOCTE-T12XP800D-EBPOCHDT12 Compact Battery-Powered Rider Scrubber. Big Productivity in a Compact, Maneuverable Rider ScrubberThe Tennant T12 delivers big productivity in a compact, maneuverable rider scrubber. It’s perfect for many uses ranging from retail and public spaces, to manufacturing, logistics and food and beverage applications. With its rugged engineering and appealing design, the T12 provides the quality customers have come to expect from Tennant.TE1200383Front BladeTE1200384Rear Blade TE1200430Side Blade (order 2)TE1037821Panel FilterTE122024014” Poly Side Brush (1 required)TE122024116” Poly Scrub Brush (2 required)TE120157231” Polypropylene Scrub Brush(2 required)All T12 scrubbers are built to specification. Please consult your Maintex sales representative for ordering options.32” DiskLarge Green 1-Step Start ButtonStandardStandardOn Board DiagnosticsStandardStandardRight Hand Dash Mounted Controls and Horn ButtonStandardNATouch-n-Go Control ModuleNAStandardSteering Wheel Mounted HornNAStandardSafety Light Package (Headlights & AV Backup Alarm)OptionalStandardDeluxe SeatOptionalStandardFeaturesT12T12 XPec-H20Safety Light PackageProductivity PackageHD Protection PackageHydrolinkOn Board ChargerAGM BatteriesSide BrushHEAVY-DUTY COMPACT PERFORMANCEThe combination of innovative features and substantial power help reduce time spent cleaning and deliver heavy-duty performance.ACEBDFINCREASE PRODUCTIVITYGet more done in less time with options such as the scrubbing side brush. Clean up to three times longer with a single tank of water using ec-H2O™ technology.LOW COST OF OWNERSHIPDurability, reliability, and innovative technology result in a low cost to own helping to improve the bottom line.HEALTH AND SAFETYEnsure peace of mind with operator safety and promote healthy and clean environments.EASY OPERATION AND MAINTENANCEEngineered to be easy to operate and maintain, the T12 maximizes up-time and productivity.Standard Equipment Includes: Remote charger and 240 AH BatteriesProductivity Package: Side Scrub Brush, Vac Wand, Spray HoseHD Protection Package: Front Bumper & Rear Squeegee ProtectionDurability. Extend component life and reduce maintenance cost with the AC brushless propelling motor that operates more efficiently than traditional DC motors.Operate easily. Operator controls are easy to use with the 1-Step™ Start Button that simplifies training and ensures consistent cleaning performance.Get results. Improve cleaning results with the scrub head (disk or cylindrical) that best suits the application and simplify maintenance with no-tool brush change.Enhance experience. Reduce fatigue and increase operator safety with the large operator compartment allowing substantial leg room while providing easy ingress and egress from either side of the machine.Increase productivity. Clean floors from edge to edge and achieve a 28% wider scrub path with the optional scrubbing side brush.Promote safety. Reduce the risk of slip and fall accidents with the Dura-Track™ parabolic squeegee system that provides excellent water recovery and can be changed easily without tools.ACEEBDFCleaning Path32”Solution Tank35 galRecovery Tank44 galDisk dBA Level62 dBACylindrical dBA Level63 dBA32” CylindricalDisk BrushesCylindrical BrushesReplacement Squeegees & FiltersAuto Scrubbers173EquipmentLos Angeles: (800) 446-1888San Diego: (800) 261-4456T20 Heavy-Duty Industrial Rider ScrubberMaximize productivity with ec-H2OTM technology for cleaningup to three times longer than conventional scrubbingAchieve high-performance results in the toughest environments with the T20 Industrial Rider Scrubber. The T20 delivers significant cleaning power with an exceptional scrubbing and water recovery system. This rider scrubber is easy to operate and maintain and helps improve a facility’s image by providing consistent, heavy-duty cleaning results.ConserveResourcesReduceDetergentsIncreaseSafetyImproveAirQualityReduceNoiseT16 Battery-Powered Rider ScrubberReduces Cost of Ownership By Up To 20%Reduce your cost to clean with this battery-powered rider scrubber, designed for quiet operation anytime, anywhere at 68 dBA. The floor scrubber’s user-friendly design and Touch-n-Go™ controls ensure easy operation and three sustainable technologies are available to minimize the rider scrubber’s environmental impact: ec-H2O™ technology, FaST® Foam-activated Scrubbing Technology and ES® Extended Scrubbing.ConserveResourcesReduceDetergentsIncreaseSafetyImproveAirQualityReduceNoiseChoose the ideal options to tailor the T16 Rider Scrubber to your environment• Side scrubbing brush expands scrubbing width to 45 inches to effectively clean floor edges and improve cleaning productivity• Overhead guard, heavy duty bumpers, and rear squeegee guard protect the operator and the ride-on scrubber• On-board vac wand and wide spray nozzle extend cleaning to hard-to-reach areasAll T16 scrubbers are built to specification. Please consult with your Maintex sales representative.Key machine features of the T16 Rider Scrubber• Touch n Go™ control module with 1 Step™ button allows operator to safely change scrub settings without removing hands from the steering wheel• Large 50 gal / 190 L solution tank optimizes performance and productivity• Easy-to-identify maintenance touch points ensure your investment is properly maintained and protectedKey machine features of the T20 Rider Scrubber• Touch n Go™ control module with 1 Step™ button allows operator to safely change scrub settings without removing hands from the steering wheel• Large 80 gal / 303 L solution tank optimizes performance and productivity• Easy-to-identify maintenance touch points ensure your investment is properly maintained and protectedAll T20 scrubbers are built to specification. Please consult with your Maintex sales representative.TE-T16C-ECPERFBCylindrical scrubber with 360AH Batteries, On Board Charger, Productivity Package, Light package and Dual Vacuum FansAuto Scrubberswww.maintex.com174EquipmentLos Angeles: (800) 446-1888San Diego: (800) 261-4456Nobles® Speed Scrub® 500 Walk-Behind Scrubber Reliable, effective cleaning results. Anytime. Every timeClean virtually any hard surface condition to maximize return on investment with a wide range of cleaning options and configurations. Make battery maintenance safer with the new optional Smart-Fill™ automatic battery watering system. The reliable Speed Scrub® 500 Walk-Behind Scrubber provides the right solution for your application with its versatile design, easy to use controls and durable components. Key machine features of the SS500 Battery-Powered Walk-Behind Scrubber:• Clean virtually any hard surface condition with a ride range of cleaning options, including orbital• Save time and money on battery maintenance and help increase battery performance with optional Smart-Fill™ on-board automatic battery watering system paired with IRIS® Asset Manager.• Simple controls and yellow touch points for easy maintenance.• Evenly and effectively remove floor finish with high orbital down pressure and durable isolators• NanoClean™ technology minimizes water consumption. Quiet 67 dBA noise level allows daytime cleaning with minimal disruption. Easy-to-use ergonomic design delivers foot-activated squeegee to minimize bending and wider handle for improved operation. Optional Insta-Click™ head for easy, low-touch pad attachment and removal.Nobles® Speed Scrub® 300 Walk-Behind Scrubber Experience Nobles quality with this affordable walk-behind scrubber• Clean in small, congested areas in one pass with the compact, easy-to-maneuver design• Experience Nobles quality cleaning performance while maintaining your budget• Scrub anytime, anywhere with quiet 67 dBA sound levelKey machine features of the SS300 Battery-Powered Walk-Behind Scrubber:• Wet Lead Acid is the lowest-cost battery option, and requires maintenance for optimal efficiency.• Traditional pad operation rotates in a circular motion.• Pad-assisted operation helps to pull machine along, improving ergonomics and operating speed.• Improved and durable components extend machine life and reduce cost of ownership. Outstanding water pickup for reduced slip-and-fall accidents. ec-H2O• NanoClean™ technology minimizes water consumption. Quiet 67 dBA noise level allows daytime cleaning with minimal disruption. Easy-to-use ergonomic design delivers foot-activated squeegee to minimize bending and wider handle for improved operation. Optional Insta-Click™ head for easy, low-touch pad attachment and removal.Nobles Speed Scrub 15” SS-15Cord Electric Cylindrical ScrubberGet the job done right the first time – every time! The Speed Scrub 15” corded scrubber is the best choice for smaller jobs. This machine has complete water recovery with a “no-hassle” squeegee, removes the toughest grime with the unit’s cylindrical brush system. Expect years of reliability out of this machine with its cast aluminum frame and scrub head.The SS-15 micro scrubber is the compact, efficient cleaning option for your facility:• Easy to maneuver and can easily scrub small, congested areas, in forward and reverse• Up to 30 minutes of uninterrupted cleaning time with the 3 gal / 11 L tanks• Comfortable Insta-Adjust™ handle adjusts to the operator’s height• 15 in / 38 cm cleaning path is perfect for cleaning tight entry ways• Corrosion-resistant, cast aluminum frame, and durable polyethylene rotomold tanks• 33 lb/ 15 kg of down pressure and 1200 rpm brush speed for powerful cleaning in small spacesTE9004200Electrical Speed Scrub 15”TE9008637Battery Speed Scrub 15”TE-SS500-650-000126” Disk with on board chargerTE-SS500-001228” Orbital with ec-H20 & Smart-Fill BatteriesTE-SS300-000117” Disk with Pad AssistTE-SS300-000520” Disk with Drive Insta-ClickTE-SS300-000620” Disk with Insta-Click & ec-H2OTE-SS300-001020” Orbital with ec-H2OAuto Scrubbers175EquipmentLos Angeles: (800) 446-1888San Diego: (800) 261-4456Maintex Professionals’ Choice Low Speed 13”, 17” & 20” Floor MachinesThis 1.5 HP floor machine is a high quality dual capacitor machine that can be used on carpet or hard floors. The value on this machine is unsurpassed, because of its powerful motor, triple planetary transmission, and low cost. The all metal construction is mounted to a heavy-duty 66 style frame. Features like the adjustable handle, large transport wheels, non marking bumper, and safety switch levers make it a perfect machine for any user that need to scrub, strip or polish hard floors. Features:• All metal construction• Handle mounted circuit breaker• 1.5 HP motor• 17” or 20” deck• CSA-US listedTennant’s Single and Dual Speed Floor Machines Strip, Scrub, and Polish Floors• Count on years of performance from these durable polyethylene based Floor Machines• Achieve specialized cleaning performance with either single speed (SS) or dual speed (DS)• Have the flexibility to strip, scrub, and polish hard floors with these multi-purpose Floor Machines• Standard Pad Driver included Key machine features of the FM-17-SS, FM-20-SS & FM-20-DS Floor Machines:• 1.5 hp / 1.12 kW motor provides outstanding cleaning and maintenance with a heavy duty design• Easy-to-use twist grip operation with safety lock standard that helps protect operators and your environment• 60 dBA sound level on FM-17-SS and FM-20-SS models for quiet, convenient operationShown with Optional Deluxe 2.5 gallon shampoo tank TE9007330FM-17-SS Heavy Duty 17” Floor Machine Single SpeedTE9007336FM-20-SS Heavy Duty 20” Floor Machine Single SpeedTE9007334FM-20-DS Heavy Duty Dual Speed 20” Floor Machine 262515004 Gallon Shampoo Tank2625160Required bracket for (26251500) Shampoo Tank MountingTE10458754-Gallon Tennant Solution Tank•Pad Driver included Bona 17” FlexiSand DCS SanderEngineered for performance, convenience, durability, unequaled power, superb balance and superior dust pick-up. The new low deck design combined with the adjustable illuminator light make working in hard-to reach places easier than ever before. In addition, the FlexiSand has a unique adjustable handle. The push button activated handle is easy to use and is adjustable to meet the needs of any user. When operated with a backpack vacuum or dust control vacuums, the FlexiSand is virtually dust free, meaning healthier working conditions for you, and better finish results leading to complete satisfaction of your customers.Features:• Motor: 1.5 Heavy Duty, Dual Capacitor 115 Volt/175 RPM, 15 AMP, 60 HZ• Gear Box: 10-1, All-Steel, permanently sealed and lubricated• Switch: Dual control safety lock trigger mechanism• Machine Weight: 102 lbs. with pad driver• Pad Driver Size: Net 16” for 16” pads, discs and screens• Illumination: Two long-life, high-output LED bulbsMX13-0113” Low Speed Floor MachineMX13-DP12” Bristle Pad Driver (Not Included)MX17-0117” Low Speed Floor Machine - 175 rpm MX20-0120” Low Speed Floor Machine - 175 rpm MX-TANKDeluxe 2.5 Gallon Solution Tank221150Bona FlexiSand 17” DCS Buffer221140Bona Multidisc 16” Drive Plate221145Bona Multidisc 20” Drive Plate (20” Floor Machine Needed)Floor MachinesOrbot Sprayborg Multipurpose MachineThe Orbot is the most versatile, compact commercial and residential orbital floor machine on the market. With it’s unique driver system, assortment of pads and brushes, it can be used to clean, scrub, sand, strip, and polish any carpet or hard floor. Features:• 1725 RPM - 1hp Motor• 82lb Transport Weight 102lb Assembled Weight• Quick Connect Cord - for easy cord removal• High-gloss powder coated finish & adjustable frame• 10” Wheels - Chemical resistant and non-marking• Spray Switch - Manual control of water amountHOSACP1919” HOS AgiClean PadsHOSO40WKWeight Set Kit - 40 lbsHOSOCB17Concrete BrushHOSOHFDKDriver Plate KitHOSOTGBTile and Grout BrushHOSSZP2122” SuperZorb PadsOrbot Vibe 17” with Spray System & Pad HolderSave yourself time, money and labor by owning one machine that does it all. By incorporating our patented dual-action orbital system, the Orbot Vibe generates a powerful form of agitation that delivers superior results in all professional deep and interim cleaning, scrubbing, grinding, stripping, and polishing applications.Compact & Light Weight with adjustable frame4.75-Gallon On-Board Solution TankQuick Connect CordFixed Spray Jets10” (25CM) WheelsHOSOV17Orbot Vibe 17 W/Spray System & Pad HolderHOSOSB1717” Orbot SprayborgAccessories for Sprayborg & Vibewww.maintex.com176EquipmentLos Angeles: (800) 446-1888San Diego: (800) 261-4456EBG-9 Doodle Scrub - Floor Preparation Machine This Doodle Scrub EBG-9 floor prep machine offers an aggressive cleaning option for those hard to reach areas. The Doodle Scrub makes quick work of bathrooms, as it easily cleans behind toilets, under partitions, and into other hard to reach areas. Weighing in at only 22 pounds, it provides nearly the same amount of downforce as the industrial Square Scrub EBG-20/C. Features:• 4100rpm .25hp Motor • Lightweight – just 22 lbs• 50db Operating Sound OutputSQ-SS051190Handle Trigger Push Button AdapterSQSS051190Carrying StrapSQ-SSEBG-9-SKATESkate AttachmentSQ-SSP0511SQPSQP Surface Prep Pad for Finish RemovalSQ-P0511TGBVBlue Tile & Grout Pad w/Velcro BackingSQ-P0511XTRMelamine Extreme Sponge PadSQ-SSP0511BLUBlue Driver PadSQEBG-9EBG-9 Doodle ScrubDriver Pads:Accessories:Mini Edger Scrubber/PolisherThis cord-electric mini scrubber/polisher features all the versatility of larger polishers, but lets you clean in tight corners, along baseboards and under fixtures. Our popular Mini-Edger model features a 6” width and has numerous accessories for use on carpet, hard floor, wood floors and other surfaces. Comes standard with a pad driver, splash guard and Mal-Grit brush.MotorScrubber quickly and effortlessly cleans your washrooms, showers, stairs, skirting / base boards, windows, swimmingpools, motor vehicles and other hard to clean areas. A real workhorse with an impressive 4 hours runtime from one charge. Taking only 8 hours to fully re-charge. The MotorScrubber is 100% waterproof and submersible in water with no shock risk due to its extra low safe voltage. Includes: aluminum telescoping handle, hub - rotating disk, back pack harness, battery charger, control handle, medium duty brush, floor pad holder - drive plate, 8” black pad, 8” red pad, 8” microfiber pad.Accessories & Replacement ItemsAccessories & Replacement ItemsP515451Mini-Edger MS1000MotorScrubber 2000LP513650Splash guardP510956“Grout” Mal-Grit brushP510954Baseboard nylon brushP510952Scrubbing poly brushP973002Red mini polisher padP973003White mini polisher padP973015Black mini polisher padP511354Carpet bonnet padP510950Mal-Grit brush2820010Mal-Grit grout brushP5159505 1/2” Pad DriverMS102525 Foot Extension CableMS1038Light Duty Scrub BrushMS1048Skirting Board & Stair BrushMS1060Black Stripping PadTennant F14 Walk-Behind Orbital Scrubber Chemical-Free Floor Finish RemovalOrbital Scrubbing• Even floor finish removal across the entire cleaning path with a rectangular scrub head that easily reaches into corners and hard to reach areas• Chemical-free floor finish removal alternative with the quality and reliability you expect from TennantF14 Orbital Floor Machine• Great for compact spaces• Two standard weight sets are included at 48 lbs, and an optional set is available, adding an additional 24 lbs• Isolators reduce vibrations to the operator’s handsTE1071993F14 Orbital ScrubberTE9010678Optional Added Top Weight Kit w/ 2 WeightsTE9012582Dust Containment KitTE9012581Dust Skirt ReplacementSquare Scrub® EBG-20/C & SQEBG-28The Surface Preparation Machines feature a smooth 3450 rpm motor, 50-foot 14 gauge power cord with lighted hospital grade plug, weighs in at 158 pounds for the 20” and 216 pounds for the 28”, versatile enough to provide total floor preparation solutions with its adjustable handle and transport lock. The 6”x2” non-marking wheels and ball bearings are coupled with a 3/4” axle for greater mobility. The 20/C includes removable weights and a Dust Containment Kit. SQEBG20CSurface Prep 20” Machine w/WeightsSQEBG-28Surface Prep 28” MachineAccessories & Add OnsSize20”28”Transport Weight73 lbs81 lbsAssembled Weight158 lbs216 lbsOperating Sound73 dBA69 dBAFrame Gauge10 Gauge Powder Coated Steel 7 Gauge Powder Coated SteelPad Size14” x 20”14” x 28”For additional pads see pages. #131 - 134SS142009SAdd On Sliding WeightSQ-P1420TGB20” Tile & Grout PadSQ-P1428TGB28” Tile & Grout PadSQ-P1420CB20” Microfiber Carpet PadFloor Machines177EquipmentLos Angeles: (800) 446-1888San Diego: (800) 261-4456Short Trim Bristle Pad Driver w/Riser (Manufacturer recommends 1” Smaller than Machine Size)Heavy polypropylene strands trimmed irregular at 3/4” are staple set in our TUFF-BLOCK®, making this the superior tufted pad driver choice. Tufts penetrate into the pad for secure holding power. Includes our 1-1/4” thick plastic riser. Mal Grit Xtra Orange Heavy Duty 46 GritHeavy duty concrete cleaning replaces Hi Pro Style pads. The most aggressive grit available. This heavy gauge nylon with larger grit is used for stripping heavily soiled floors, such as concrete floors in an industrial setting. Riser required for use with 20” floor machine.Mal Grit Lite Red Brush 500 Grit (Manufacturer recommends 2” Smaller than Machine Size)Light scrubbing of floors, replaces red pads. Offers the durability of gritbrushes with minimum aggression. For daily scrubbing of a variety of tiles, marble, terrazzo and non-slip epoxy finishes.Carpet Scrubbing Brushes(Manufacturer recommends 2” Smaller than Machine Size)27211313” Pad Lok Drive Brush w/riser27211515” Pad Lok Drive Brush w/riser27211616” Pad Lok Drive Brush w/riser27211717” Pad Lok Drive Brush w/riser27211818” Pad Lok Drive Brush w/riser257120212” Mal Grit Lite Scrub Red Brush262518615” Mal Grit Lite Scrub Red Brush262518716” Mal Grit Lite Scrub Red Brush2625186017” Mal Grit Lite Scrub Red Brush27213018” Mal Grit Lite Scrub Red Brush262518920” Mal Grit Lite Scrub Red Brush262324 14” Nylon262325 15” Nylon2225192319” Mal Grit Xtra, Orange Brush2625192420” Mal Grit Xtra, Orange Brush262327 17” Nylon262328 18” Nylon27111814” Bonnet for 17” Dirt Napper 263943515” Dirt Napper263943717” Dirt Napper w/Riser & Clutch Plate263943617” Bonnet Lok II26232919” Nylon w/Riser & Clutch Plate273291818” SPINSAFE Carpet Scrubbing BrushHarpoon Face/Hook Style Mighty Lok Pad Driver w/built in Riser(Manufacturer recommends 1” Smaller than Machine Size)The molded polymer pad face has hundreds of individual hooks that grip into the threads of a floor pad and hold it securely while operating. The solid block includes a built-in riser and showerfeed holes allow use with solution dispensing machines.26233016” Mighty Lok Pad Driver w/built in Riser (Clutch Plate Included)26233119” Mighty Lok Pad Driver w/built in Riser (Clutch Plate Included)Clutch Plates & RisersDesigned to flex vertically and compress horizontally to reduce machine wobble and operator fatigue.262380Universal Clutch Plate NP-9200A505195Center-Lok 3272026Plastic RiserMal Grit Scrub Green Brush 120 Grit(Manufacturer recommends 2” Smaller than Machine Size)Regular scrubbing of floors, best on tile and grout. Replaces green padsAn excellent general scrubbing brush for frequent maintenance cleaning. Flexible enough for cleaning narrow grout lines and uneven surfaces.27212711” Mal Grit Scrub Green Brush262520415” Mal Grit Scrub Green Brush262520917” Mal Grit Scrub Green Brush2625205NP18” Mal Grit Scrub Green Brush w/Clutch Plate2625192920” Mal Grit Scrub Green BrushMal Grit Black Color Heavy Duty 80 Grit (Manufacturer recommends 2” Smaller than Machine Size)Heavy scrubbing, replaces black pads. Our most popular grit brush. An aggressive brush for general scrubbing or stripping finishes from hard surfaces. Effectively cleans wide grout lines.2624150013” Mal Grit Black Brush2624151014” Mal Grit Black Brush w/Clutch Plate262415015” Mal Grit Black Brush262415116” Mal Grit Black Brush262519017” Mal Grit Black Brush2624151318” Mal Grit Black Brush w/Clutch Plate262518419” Mal Grit Black Brush2624151220” Mal Grit Black BrushFloor Machine Brushes272119NP19” Pad Lok Drive Brush w/riser & Clutch Plate27212020” Pad Lok Drive Brush w/riser263943818” Dirt Napper2639438-BDirt Napper Bonnet263943919” Dirt Napper2639439-BDirt Napper Bonnetwww.maintex.com178EquipmentLos Angeles: (800) 446-1888San Diego: (800) 261-4456Mastic Removal Tool 25 Grit - 10 Blade Diamond CoatedThe Diamabrush™ Mastic Removal Tool is designed to remove stubborn coatings fromconcrete such as mastic, carpet or tile adhesive, or thin-set and thin mil coatings like urethane and paint. Diamond-coated blades grind tough coatings away. Mounts to any standard floor buffer or auto scrubber. Replacement blade kits available.Concrete Polishing SystemDiamabrush™The Diamabrush™ Polishing System is the most significant innovationin concrete polishing in the last 50 years.The System transforms ordinary cleaning machines into concrete polishing machines through everyday cleaning routines. No need for heavy, expensive equipment or harsh chemicals.Progressing through a series of increasing finer diamond grits, the pores of the concrete are progressively closed, ultimately resulting in a retail-like finish. The multi-step system provides the flexibility for the user to choose how many steps are needed to achieve the desired surface finish.The Diamabrush by Malish concrete and Terrazzo floor polishing system depends on the use of the increasingly fine grit polymer inserts. Each concrete polishing tool includes flexible blades that allow the diamonds to remain in constant contact with the floor.The polymer blades are designed around removable, slotted retainers. Instead of having to replace the entire tool due to wear and tear, simply order a blade replacement kit. All polymer blades are easily removed and easily replaced, which enhances the life of the tool.262384 16” Mastic Removal Tool includes Riser and Standard Clutch Plate2624149Blade Replacement Tool Kit• 50 Grit Polymer Tool• 100 Grit Polymer Tool• 200 Grit Polymer Tool• 400 Grit Polymer Tool• 1000 Grit Polymer Tool• 2000 Grit Polymer ToolAll available in various sizesto fit most machines including autoscrubbers.Floor Machine BrushesNext >